TileLetter is the industry's leading tile magazine

Wednesday, November 30, 2022

The industry’s leading tile installation magazine

HomeNewsNTCA August Regional Training Programs includes GPTP; new Thick-Bed Installation program

NTCA August Regional Training Programs includes GPTP; new Thick-Bed Installation program

If you are in Illinois or Michigan, get ready to learn about gauged porcelain tile panel installations in August from the National Tile Contractors Association (NTCA). And the tile curious in Ohio have the opportunity to attend a brand new regional training module – Thick-Bed Installations  — later in the month in Columbus.  

On Wednesday, August 10, tile contractors will have the opportunity attend the GPTP/Slabs training at Atlas Concorde, 1307 N. Belsay Rd., Burton, MI, sponsored by Genessee Tile. Trainers Robb Roderick and Chad Jones will present the program. For more information, contact Jordan Griffis at [email protected] or 616.648.4446 Register here.

On Wednesday, August 17, GPTP/Slabs Training come to Elk Grove Village, IL, sponsored and hosted by Daltile at 1601 Pratt Blvd. NTCA Trainers Matt Welner and Chad Jones will present the program. For more information, contact Shawn Williams at [email protected]  or phone 847.593.9008. To register, click here.

NTCA’s new Thick-Bed Installations program is designed to is to increase familiarity with the flexibility of dry-pack mortar beds to resolve a wide range of installation challenges and to achieve tile industry standard substrate requirements.

On Friday, August 26, NTCA will debut a brand new regional training program – Thick-Bed Installations – at America’s Floor Source in Columbus, OH at 3374 Millennium Court. Instruction will be given in both classroom and hands-on environments, and attendees will learn how to use and apply ANSI A108 installation standards and TCNA Handbook methods. NTCA Training Director Mark Heinlein, along with trainers Randy Fleming and Chad Jones, will present the program. For more information, contact Sarah Schnulo at [email protected] or phone 614.323.7252. To register, click here.

These all-day trainings begin at 7:30 a.m.

What to expect

Learn about installing GPTP and the tools and techniques needed to do it properly.

The GPTP/Slabs Training gives the grounding to install porcelain panels with confidence and accuracy. This free training will teach you the new tile industry standards and methods for installing GPTP. You’ll also learn how GPTP is made, where it can be used and the special tools, setting materials and techniques required to install it. 

This program will emphasize:

  • Introduction to tile industry standards
  • Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels
  • Use of specialty tools and setting materials to install GPTP
  • Working with a team to install GPTP

The primary learning objective of the free Thick-Bed Installation program is to become familiar with the flexibility of dry-pack mortar beds to resolve a wide range of installation challenges and to achieve tile industry standard substrate requirements. Focus will be on thick-bed installations for floors and shower pans, using a variety of drain types and membranes, with additional instruction on wall installations.  Areas to be covered include:

• Practical application of ANSI standards for thick-bed installations

• How to locate and apply TCNA Handbook methods for thick-bed installations

• Analysis of wall and floor substructures / substrates for flatness

• Substrate preparation requirements for floors and walls

• Material components, recipes, ratios for site-mixed dry-pack mortar mixes

• Types and uses of pre-mixed / bagged dry-pack mortar mixes

• Bonded and un-bonded thick-bed systems

• Movement joints in a thick-bed system

• Reinforcing materials in a thick-bed system

• Tools and techniques used to construct thick-bed installations

• Wet area drain systems / slope to drain / sloped fill / sub-surface and surface applied membranes

• Screed methods and techniques

This program will emphasize:

• Applicable tile industry standards and methods

• Compliance with manufacturer instructions

• Substrate analysis, preparation, installation

• Use of tools for thick-bed installations

• Efficient work-flow planning and teamwork

• Jobsite safety and health practices

September preview

If your August schedule is full, plan for one of the four all-day regional trainings NTCA will conduct in September:

  • September 2 at Crossville, Woburn, MA, sponsored by Belknap White Group  — GPTP
  • September 9 at Floor & Decor in Bohemia, NY —  Substrate Prep/LFT
  • September 22 at Daltile, Boston, MA – GPTP
  • September 28 at Floor & Decor, Chicago, IL – Substrate Prep/LFT
  • Click here to learn more.

Demand for this free training is high. Be sure to register early. To ensure the best training experience possible, registration is limited. If the class is full, your registration will be added to our waiting list and you will be contacted if a seat opens.

- Advertisment -

Most Popular

- Advertisment -